FREE SHIPPING ON ORDERS OF $75 OR MORE!!!

My Cart

Cart $0.00

You have no items in your shopping cart.

LunaSea Mods

10 Item(s)

Set Descending Direction
per page

Grid  List 

  1. Talisman - SN 09

    Talisman - SN 09

    The Talisman is a mechanical, dual 18650 wood box mod.  Each Talisman was created to give the owner the ability to see both worlds clearly, the Spiritual and the Physical.
    As is Above, So is Below.
    Talisman mods are built on a Luna 2 frame that use batteries in parallel.  The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set.  Each Brazilian eye agate stone is hand picked and polished to a high luster.  Copper inlays are acid etched then hand formed to give each devices its unique texture and artistic appeal. The triggers are hand formed then riveted onto a solid Brass ball, formed and split at the end. The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Next LunaSea installs the internals with solid copper wiring soldered to the connections. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Finally the trigger is installed and the unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

  2. Talisman - SN 11

    Talisman - SN 11

    The Talisman is a mechanical, dual 18650 wood box mod.  Each Talisman was created to give the owner the ability to see both worlds clearly, the Spiritual and the Physical.
    As is Above, So is Below.
    Talisman mods are built on a Luna 2 frame that use batteries in parallel.  The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set.  Each Brazilian eye agate stone is hand picked and polished to a high luster.  Copper inlays are acid etched then hand formed to give each devices its unique texture and artistic appeal. The triggers are hand formed then riveted onto a solid Brass ball, formed and split at the end. The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Next LunaSea installs the internals with solid copper wiring soldered to the connections. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Finally the trigger is installed and the unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

  3. Luna V3 DNA 75 - SN 0005

    Luna V3 DNA 75 - SN 0005

    The Luna 3 is powered by a DNA 75 chip that requires one 18650 li-ion battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

    Out of stock

  4. Luna V3 DNA 75 - SN 0009

    Luna V3 DNA 75 - SN 0009

    The Luna 3 is powered by a DNA 75 chip that requires one 18650 li-ion battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

  5. Luna V3 DNA 75 - SN 0012

    Luna V3 DNA 75 - SN 0012

    The Luna 3 is powered by a DNA 75 chip that requires one 18650 li-ion battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

  6. Luna V3 DNA 75 - SN 0006

    Luna V3 DNA 75 - SN 0006

    The Luna 3 is powered by a DNA 75 chip that requires one 18650 li-ion battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $600.00

    Out of stock

  7. Luna V3 DNA 200 - SN 0002

    Luna V3 DNA 200 - SN 0002

    The Luna 3 is powered by a DNA 200 chip that uses one 11.1 volt lipo battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.   
    Learn More
    $650.00

    Out of stock

  8. Luna V3 DNA 200 - SN 0006

    Luna V3 DNA 200 - SN 0006

    The Luna 3 is powered by a DNA 200 chip that uses one 11.1 volt lipo battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax.  Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.    
    Learn More
    $650.00

  9. Luna V3 DNA 200 - SN 0004

    Luna V3 DNA 200 - SN 0004

    The Luna 3 is powered by a DNA 200 chip that uses one 11.1 volt lipo battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.   
    Learn More
    $650.00

  10. Luna V2.0

    Luna V2.0

    The Luna 2 is a full mechanical, parallel 18650 custom wood box with a very unique trigger. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit. The triggers are hand formed then riveted onto a solid Brass ball, formed and split at the end. The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Next LunaSea installs the internals with solid copper wiring soldered to the connections. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Finally the trigger is installed and the unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.  
    Learn More
    $250.00

    Out of stock

10 Item(s)

Set Descending Direction
per page

Grid  List